Portable refrigeration door gasket welder is ready for shipment
 |
| Portable Refrigerator door gasket welder |
Do you want your own small business ? If so, I recommend this portable gasket welder for you.
Every family has their own refrigerator, after some years later, the refrigerator door gasket will become hardness, and lose it's seal function, or the magnet lose power, in this case, a new refrigerator door gasket should be replaced. every family need replace this part, so it is a big potential market. so you need a economical and easy tool for your gasket repair business.
We developed this portable fridge door gasket welder to help you realize your business dream.
Introduction:
(1) Usage: This portable manual gasket welder is mainly used for gasket repairing work.
(2) Machine weight: 8Kg, Both machine and mold assembled weight is about 10Kg, It is easy to take any place by hand.
(3)Overall size (LXWXH): 35CM X 27CM X 13CM
(4) Mold weight: 2.3Kg / Set
(5) Heating temperature: about 250--270 ℃
(6) Heating power: 150Wx 3= 450W, the heater is coated by chrome, which can use long time, and insulate heating by PTFE
(7) Output: about 50-80 gasket frame / 8 hours
(8) Operation type: manual
(9) Power supply: 220V, Single Phase, (110V is also available in south American market).
(1) Usage: This portable manual gasket welder is mainly used for gasket repairing work.
(2) Machine weight: 8Kg, Both machine and mold assembled weight is about 10Kg, It is easy to take any place by hand.
(3)Overall size (LXWXH): 35CM X 27CM X 13CM
(4) Mold weight: 2.3Kg / Set
(5) Heating temperature: about 250--270 ℃
(6) Heating power: 150Wx 3= 450W, the heater is coated by chrome, which can use long time, and insulate heating by PTFE
(7) Output: about 50-80 gasket frame / 8 hours
(8) Operation type: manual
(9) Power supply: 220V, Single Phase, (110V is also available in south American market).
Why choose this machine ?
(1) The welding mold is only 2.3kg, and easy to install the mold, even for the new operator without any experience.
(2) This machine is only about 800USD, and mold is 200USD/pair, It is an economical solution for you begin your own gasket repair business.
If you want to order this tool, please feel free contact with me :
(1) The welding mold is only 2.3kg, and easy to install the mold, even for the new operator without any experience.
(2) This machine is only about 800USD, and mold is 200USD/pair, It is an economical solution for you begin your own gasket repair business.
If you want to order this tool, please feel free contact with me :
www.fridgedoorgasket.com
fridgedoorgasket@126.com
H.P/ Whats APP: 0086-18561328323
Skype: zhouchaofei2012
没有评论:
发表评论