Refrigeration Gasket Welder for Gasket Manufacturer and Replacement: 2015

2015年12月7日星期一

Portable refrigeration door gasket welder is delivered to our Greece customer

Portable refrigeration door gasket welder is delivered to our Greece customer

Portable refrigerator door gasket welder

Portable refrigeration door gasket welder

Portable refrigeration door gasket welder kits

Do you want to have your own small business?

If so, I recommend this portable refrigerator door gasket welder for you.

Every family has their own refrigerator, after some years later, the refrigerator door gasket will become hardness, and lose it's seal function, or the magnet lose magnetic, in this case, a new refrigerator door gasket should be replaced. or else, the refrigerator chamber will be frozen, or the cooling-compressor restarts continuously, which makes the family suffers a lot of noise.

Since every family needs replace this part, it is a big potential market which is full of business chance. if you have a economical and small refrigerator door gasket repair tool, yes, you can begin your own business and make yourself the small boss.

In order to realize your business dream, We developed this small portable fridge door gasket welder. It is small, cheap, easy, anyone can operate it without any experience.

Introduction:
(1) Usage: This portable manual gasket welder is mainly used for gasket repairing work. it is not suit for big-output continuous production.
(2) Machine net weight: 8Kg, Both machine and mold assembled weight is about 10Kg-11Kg, It is easy to take any place by hand.
(3)Overall size (LXWXH): 35CM X 27CM X 13CM
(4) Mold weight: 2.3Kg / Set
(5) Heating temperature: about 250--270 ℃
(6) Heating power: 150Wx 3= 450W, the heater is coated by chrome, which can use long time, and insulate heating by PTFE
(7) Output: about 50 gasket frame / 8 hours
(8) Operation type: manual
(9) Power supply: 220V, Single Phase, (110V is also available in south American market).

Why choose this machine ?
(1) The welding mold is only 2.3kg, and easy to install the mold, even for the new operator without any experience.

(2) This machine is only about 800USD, and mold is 200USD/pair, It is an economical solution for you begin your own gasket repair business.

How to operate this portable fridge door gasket welder ?

Step No.1 : Cut gasket to 45 degree

Notice: cut 45 degree must use special cutting tools.

Step No.2: Insert fridge door gasket to the welding mold

Keep end-gasket be out of the mold linear 1 mm - 2 mm, two sides should be symmetrical, or else, the heating temperature will not be even, one side end-gasket which is near to the heater is burnt but another side end-gasket which is far from heater is not melt enough.

Step No.3: Heat fridge door gasket

Move heater from back-side to front-side and keep heating time 5s -6s (different PVC material use different heating temperature) until the smoke is occurred.

Step No.4: Weld fridge door gasket

Left hand push back heater, at the same time, right hand move right-mold to the left until left-right molds touch tighten for about 5s - 6s, do not loosen hands until the gasket corner is cool enough.

Step No.5: Take out the mold cover

Take out the nold cover “A” and “B”, and the gasket corner is shown out.

Step No.6: Take out the welded fridge door gasket corner by hand.

Step No.7: re-set the welding mold

Install the welding mold cover "A" and "B", move right-mold table to the first position.

And begin the first step 1.

A new cycle starts

Getting more detailed information, please contact us freely:

FDG CO.,LTD

www.fridgedoorgasket.com

fridgedoorgasket@126.com

H.P/ Whats APP: 0086-18561328323

Skype: zhouchaofei2012

Patent Product, Copy forbidden !

2015年11月13日星期五

PLC Double Corner Refrigeration Door Gasket Welder is Ready for Shipment

PLC Double Corner Refrigeration Door Gasket Welder

Introduction:

(1) OMRON PLC automatic control system reduce most faults of the caused by complex electric apparatus.

(2) welds 2 gasket corners every time, Output about 500 sets of gasket frame per 8 hours.

(3) The welding mold has sharp liner, which can clean and trim the remaining PVC material to keep the gasket surface smooth and strong.

(4) Photoelectrical protect system in front of the welding mold can avoid hands being injured in operation.

2015年11月7日星期六

Portable refrigeration door gasket welder is ready for shipment

Portable refrigeration door gasket welder is ready for shipment

Portable Refrigerator door gasket welder

Do you want your own small business ? If so, I recommend this portable gasket welder for you.

Every family has their own refrigerator, after some years later, the refrigerator door gasket will become hardness, and lose it's seal function, or the magnet lose power, in this case, a new refrigerator door gasket should be replaced. every family need replace this part, so it is a big potential market. so you need a economical and easy tool for your gasket repair business.

We developed this portable fridge door gasket welder to help you realize your business dream.

Introduction:
(1) Usage: This portable manual gasket welder is mainly used for gasket repairing work.
(2) Machine weight: 8Kg, Both machine and mold assembled weight is about 10Kg, It is easy to take any place by hand.
(3)Overall size (LXWXH): 35CM X 27CM X 13CM
(4) Mold weight: 2.3Kg / Set
(5) Heating temperature: about 250--270 ℃
(6) Heating power: 150Wx 3= 450W, the heater is coated by chrome, which can use long time, and insulate heating by PTFE
(7) Output: about 50-80 gasket frame / 8 hours
(8) Operation type: manual
(9) Power supply: 220V, Single Phase, (110V is also available in south American market).

Why choose this machine ?

(1) The welding mold is only 2.3kg, and easy to install the mold, even for the new operator without any experience.

(2) This machine is only about 800USD, and mold is 200USD/pair, It is an economical solution for you begin your own gasket repair business.

If you want to order this tool, please feel free contact with me :

www.fridgedoorgasket.com

fridgedoorgasket@126.com

H.P/ Whats APP: 0086-18561328323

Skype: zhouchaofei2012

2015年11月6日星期五

PLC Single Corner Refrigeration Door Gasket Welder is put into Service in a USA Company

PLC Refrigeration Door Gasket Welder

1. Introduction:

(1) PLC control system is adopt. operation is easier, machine runs stably, and easy for repair.

(2) it welds 1 gasket corner every time, Output about 200 gasket frame per 10 hours. It suits for small or middle scale fridge gasket manufacturer, or some gasket repair studio.

(3) refrigeration door gasket welding mold is small and light weight, total weight is only about 2 kg, price is cheaper,installing mold needs 10 minutes, mold manufacturing time is short, transport freight is cheaper, if you have more than 10 kinds of gaskets, you do not need worry about expensive mold cost and troublesome mold replace works anymore.

(4) Vacuum pump is equipped on this machine, the welding mold has vacuum holes, if you want gasket beautiful, smooth and strong, the vacuum system will help you to improve the welding quality.

(5) exhaust system is also equipped to take away the toxic gas which is occurred in burning the PVC material.

2. Main Technical Parameters:

Overall Size…….....………1300X1300X1100mm
Mold Weight……………………………About 2KG
Left-right stroke………….......................……50mm
Front-back stroke…………...............………60mm
Install Power………………...................……1.1KW
Heating Power……………...................……0.8KW
Fan power……………………..............………60W
Working cycle….............…11~14S / Single corner
Output………………………………200 pcs/10 hour
Total Weight…………………………………250kg

3. What's advantage for this refrigeration gasket welder ?

(1) Welding mold is light weight, small size and cheap price

Traditional double-corner auto gasket welding mold weight is about 18Kg, Price is about 700USD, Install a mold need more than 30 minutes, and only the professional skilled worker can change and install mold. If you have 10 kind of gaskets with only 1 gasket welder, all of your time will wasted on changing and install molds. Normally, this big gasket welders and welding molds are used in big refrigerator company such as Samsung, Haier, Electrolux, in these companies, one gasket welder install one kind of gasket mold, 1 year, 2 year no need change any mold. If your company is a big output refrigerator gasket company, It is a naturally a correct choice to use this traditional big welder and welding mold.

But most of the gasket workshop does not need big output machine, they also can not afford the big cost in the machine and welding molds, how to deal with this problem ? Ok, we have new solution to satisfy our customer's requirement. we improve this traditional big welder, and developed a new kind of "Single-corner fridge door gasket welder. This new gasket welder's output is about half of the big gasket welder, but this output is big enough for some small-scale gasket workshop. we re-designed gasket welding mold, and make this mold weld one gasket corner every time, but the mold weight is decreased to 2 Kg, the size is just as big as a palm, or longer than a pen, any person can pick up it easily, what's more, the price is only about 300 USD, even if 10 kind of gaskets, you can afford the mold cost, Besides, it is only need 10 minutes to install the mold without any rich experience.

If you need make new molds and transport molds by air, you do not need worry the big weight and expensive air-express cost any more, because this new mold is small ,light weight.

Traditional big welding mold and new designed small welding mold

New designed welding mold is as long as a pen

(2) Vacuum system make the gasket welding flat, strong and beautiful

Tip 1: How vacuum system work?

without vacuum,the magnet zone is not flat

In vacuum,the vacuum force pull out the magnet zone

After vacuum, the magnet zone is flat

Tip 2: Please see follow gasket welding quality with vacuum and without vacuum.

(3) The welded corner is no need trim by hand anymore

because the welding mold linear is very sharp, which can trim the welded slag automatically,the function is like a knife to trim the welded slag.

Trim gasket corner by hand knife, surface is not flat and beautiful

Trim gasket corner by sharp linear of the welding mold, surface is flat and beautiful

(4) Machine is operated completely by color PLC screen.

4. Good quality gasket frames

5. Another new Refrigeration Door Gasket Welder is ready for ship to USA

6.Spare parts and operation manual are taken with the machine

7. Special power supply transformer (220V to 110V) is prepared for USA customer.

8. If you need more technical support, please feel free contact with us.

www.fridgedoorgasket.com
Email: fridgedoorgasket@126.com
Skype: zhouchaofei2012
Tel / Whats APP: 0086-18561328323

2015年9月1日星期二

PLC auto refrigerator door gasket welding machine

Introduction:

(1) Siemens Color PLC automatic control system, operate easier, machine runs stably, and easy for repair

(2) welds 1 gasket corners every time, Output about 200sets of gasket frame per 10 hours. It suits for small
or middle scale fridge gasket manufacturer.

(3) welding mold is small and light weight, total weight 2kg, price is cheaper,install mold need 5--10 minutes, mold manufacturing time is short, transport freight is cheaper, if you have more than 10 kinds of
gaskets, you do not need worry about expensive mold cost anymore.

(4) Vacuum pump is equipped on this machine, the welding mold has vacuum holes, if you want gasket beautiful, smooth
and strong, the vacuum system will help you to improve the welding quality.

主要技术参数(Main Technical Parameters)

外形尺寸(Overall Size)……………1300X1300X1100mm

模具重量(Mold Weight)……………………………About 2KG

横向合模行程(Left-right stroke)………………50mm

纵向合模行程(Front-back stroke)…………………60mm

系统总功率(Install Power)……………………1.1KW

电热系统功率(Heating Power)…………………0.8KW

引风机功率(Fan power)……………………………60W

单角完成时间（Working cycle）……11~14S / Single corner

工作效率(Output)………………………………200 pcs/10 hour

总重(Total Weight)…………………………………250kg